主要技术指标

主要技术指标

* 300 kHz to 20 GHz frequency range

* 300千赫至20千兆赫的频率范围

* Standard 3.5 mm (f) connectors

*标准3.5毫米（氟）连接器

* Fast full 3- or 4-port calibration with a single connection

*快满3或4端口与一个单一的连接校准

* NIST traceable accurate calibrations

* NIST标定

* Reduced connector wear

*减少接头磨损

* USB interface for direct control with PNA and ENA series of network analyzers

*为PNA和ENA系列网络分析仪直接控制USB接口

* Reliable solid-state switching

*可靠的固态开关

* Mixed 3.5 mm male/female connectors option available

主要描述

主要描述

The Agilent N4433A Microwave electronic calibration (ECal) module makes calibration of vector network analyzers fast, easy, and accurate. ECal is a precision, single-connection calibration technique for your vector network analyzer. Performing a full three- or four-port calibration takes less than half the time and number of connections using ECal versus mechanical cal kits. Furthermore, the accuracy of the calibration is comparable to mechanical methods. Traditional mechanical calibrations require intensive operator interaction, which is prone to errors. With ECal, the operator simply connects the ECal module to the network analyzer and the software controls the rest.

安捷伦n4433a微波电子校准（ECAL）模块使矢量网络分析仪校准快速、方便、准确。它是一种高精度，为你的矢量网络分析仪的校准技术的单连接。执行一个完整的三或四端口校准只需要不到一半的时间，用它与机械CAL套件连接数。此外，校准的准确度是机械的方法相媲美。传统的机械校准需要密集的运营商的互动，这是容易出现的错误。在瑞士，操作者只需连接Ecal模块的网络分析仪和软件控制休息。

ECal modules are transfer standards capable of transferring the factory calibration accuracy to your network analyzer. The Agilent PNA and ENA series of network analyzers controls the N4433A module directly through a USB interface. PNA Series network analyzers require firmware revision 2.5 or higher.

ECAL模块传输标准能够转移工厂到您的网络分析仪的校准精度。网络分析仪Agilent PNA和ENA系列控制n4433a模块直接通过USB接口。PNA系列网络分析仪需要固件版本2.5或更高。